Dr. Htay Htay Win

DR. HTAY HTAY WIN, Ph.D

Department of Mechanical Engineering

Mandalay Technological University

Patheingyi Township

Mandalay

Ph: +95-92026719,+95-9797622968

Email: htayhtaywin@mtu.edu.mm, htayhtayw@gmail.com

Education Profile

June2005-March 2009Doctor of PhilosophyDepartment of Mechanical Engineering, Yangon Technological University
April 1998- Feb 1999Master of EngineeringDepartment of Mechanical Engineering, Yangon Technological University
Dec 1983 – Nov 1992Bachelor of EngineeringDepartment of Mechanical Engineering, Yangon Technological University

Work Experience

March 2017 – PresentProfessorDepartment of Mechanical Engineering, Mandalay Technological University
Nov 2008-March 2017Associate ProfessorDepartment of Mechanical Engineering, Mandalay Technological University
Nov 1999- Nov 2008LecturerDepartment of Mechanical Engineering, Mandalay Technological University
Jan 1996- Nov 1999Assistant LecturerDepartment of Mechanical Engineering, Mandalay Technological University
Nov 1993 – Jan 1996InstructorDepartment of Mechanical Engineering, Mandalay Technological University

Teaching Subjects, Research Interests and Responsibility

Current Teaching Subjects  Advanced Strength of materials, Mechanics of Materials, Agricultural Process Engineering
Research InterestsSolid and Structural mechanics, Turbo machinery,
ResponsibilitiesServing Section Head of Solid Mechanics  Lab. Supervising COE, Master, Ph.D researches Teaching COE, Master, Ph.D students

Professional

Professional Engineer (July 2018)  @Myanmar Engineering Council
Asean Chartered Professional Engineer(Nov 2018)  @ Myanmar Engineering Council

Publications

JOURNALS

 1. Htay Htay Win (2012). Performance of Jatropha Oil-based Biosel Fuel in a Single-Cylinder Four Stroke Diesel Engine.  Asean Journal on Science and Technology for Development, Vol 29, Issue 2, page 77-87
 2. Htay Htay Win, Zayar Min Htike, Win Phyu Thwe (2020). Structural Analysis of Shaft for Vertical Car Parking. University Journal of Science, Engineering and Research, Volume -02, Issue 01.
 3. Htay Htay Win, San Mya Tun, Thwin Han Thar (2020). Stress Analysis of the Shelling Drum Shaft Used in Threshing Machine. University Journal of Research and Innovation, Volume 1.
 4. Htay Htay Win, Win Phyu Thwe, Zayar Min Htike (2020). Stress Analysis of Circular Bar in a Cage of Vertical Car Parking. Journal of Research and Innovation.
 5. Zaw Htet Win, Dr. Htay Htay Win, U Paing Htet Kyaw Kyaw (2015). Theoretical and Numerical Thermal Analysis of the 1st Stage Turbine Rotor Blade. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 2, Issue 2, page 90-95.
 6. Nang Yi Phoo Thet, Htay Htay Win, Zin Ei Ei Win (2016). Stress Analysis of Horizontal Cylindrical Pressure Vessel. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 3, Issue 6, page 73-83.
 7. Tin Nilar Myint, Charm Myae Zaw, Htay Htay Win (2015). Strength Analysis of Scroll Compressor. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 1, Issue 1, page 113-118.
 8. Khin Soe New, Ei Ei Htwe, Htay Htay Win (2015). Design of Threshing Cylinder for A Combine Paddy Harvester(25 HP). Mandalay Technological University Journal of Science, Engineering and Technology, Volume 1, Issue 1. Page 27-32.
 9. Po Po Thin, Myint Thein, Htay Htay Win (2016). Fatigue Analysis of Horizontal Axis Wind Turbine Shaft by Using Modified Goodman Method. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 3, Issue 7, page 58-67.
 10. Pont Pont Ei, Zin Ei Ei Win, Htay Htay Win (2016). Design and Stress Analysis of the Compressor Blade. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 3, Issue 8, page 12-17.
 11.Cho Cho Myint, Htay Htay Win, Aung Ko Latt (2017). Static, Modal and Buckling Numerical Analysis of Rear Axle Shaft for Ultra Light Car. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 1-11.
 12.Khin Mar Sein, Htay Htay Win, Nyein Aye San (2017). Influence of Compression Ratio and Fuel on the Performance Characteristics of a SI Engine. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 24-27.
 13.Moh Moh Myint Thu, Myint Thein, Htay Htay Win (2017). Contact Stress Analysis of Helical Gear and Bevel Gears in Differential Gear Box for Solar Car. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 28-34.
 14.Nang Hsu Thandar Ko, Htay Htay Win, Aung Ko Latt (2017).Modal Analysis of Ladder Chassis Frame for Solar Vehicle. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 50-57
 15.Wint Wint Khaing, Htay Htay Win, Aung Ko Latt (2017). Design and Modal Analysis of Leaf Spring for Solar Car Suspension System. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 90-96.
 16.Wint Wint Khaing, Htay Htay Win, Aung Ko Latt (2017). Vibration Analysis of Quarter Car Model Passive Suspension System for Solar Car using Matlab Software. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 97-105.
 17.Thin Thin Wai, Htay Htay Win, Myint Thein (2017). Design, Structural and Modal Analysis of Bumper Beam for Ultra-Light Solar Car. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 71-77.
 18.Yin Yin Aye, Myint Thein, Htay Htay Win (2017). Structural and Thermal Analysis of Disc Brake with and without Holes for Solar Car using Finite Element Method. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 4, Issue 5, page 112-119.
 19.Kay Zin Oo, Htay Htay Win, Ei Ei New (2018). Structural Analysis of Cross-Flow Turbine Runner Blade by Changing Different Materials and Turbine Speeds. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 5, Issue 2, page 73-78.
 20.Lae Lae Naing, Myint Thein, Htay Htay Win (2018). Vibration Transmissibility and Modal Analysis of Backward-inclined Blade Type Impeller used in Rice Mill. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 5, Issue 2, page 86-92.
 21.Phyu Phyu Thwe, Saw Yu Mon, Htay Htay Win (2018). Structural Analysis of Centrigugal Blower Impeller by Changing the Different Materials and Number of Blades. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 5, Issue 3, page 73-78.
 22. Shi Mon, Aung Ko Latt, Htay Htay Win (2018).Thermal Analysis of Locomotive Brake Block using Finite Element Method. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 5, Issue 4, page 56-63.
 23.Than Zaw Oo, Htay Htay Win, Ei Ei Khaing (2018). Vibration Analysis of Quarter Car Model Passive Suspension System for PAJERO Vehicle using Matlab Software. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 5, Issue 4, page 69-75.
 24.Tin Nilar Win, Htay Htay Win, Aung Ko Latt (2018). Structural Analysis of Turbine Blade for Turbocharger by Changing Number of Blades and Thickness. Mandalay Technological University Journal of Science, Engineering and Technology, Volume 5, Issue 5, page 65-71.
 25.Theint Theint Ei, Aung Ko Latt, Htay Htay Win (2019). Structural Analysis of Shafts for Paddy Thresher By Changing Different Materials. Mandalay Technological University Journal of Science, Engineering and Technology
 26.Thandar Htwe, Htay Htay Win, Aung Ko Latt (2019). Performance Analysis of Threshing Unit for Paddy Thresher. Mandalay Technological University Journal of Science, Engineering and Technology.
 27.Khaing Zar Lwin, Htay Htay Win, Myint Thein (2019). Performance Evaluation of Modified Weeder Blade for Single Row Power Weeder, Mandalay Technological University Journal of Science, Engineering and Technology.
 28.Aye Moh Moh Aung, Myint Thein, Htay Htay Win (2019). Contact Stress Analysis of Worm Gear Used in Power Transmission System for Power Weeder. Mandalay Technological University Journal of Science, Engineering and Technology
 29.Htay Htay Win, Ei Ei Htwe, Than Than Htay (2014). Design, Fabrication and Performance of Threshing Unit in DKC-685 Combine Harvester. International Journal of Scientific Engineering and Technology Research, Volume 3, Issue 10, pp 2192-2195.
 30.Than Than Htay, Htay Htay Win, Zin Ei Ei Win, Dr. Myint Thein (2015). Effect of Dynamic Stiffness on Performance of Paddy Grain Losses in Axial-Flow Thresher. International Journal of Innovative and Applied Research, Volume 3, Issue 8, pp 13-27.
 31.Kay Thi Myaing, Htay Htay Win (2014). Design and Analysis of Impeller for Centrifugal Blower using SolidWorks. International Journal of Scientific Engineering and Technology Research, Volume 3, Issue 10, pp 2138-2142.
 32.Win Lai Htwe, Htay Htay Win, Nyein Aye San (2015). Structural and Thermal Analysis of Various Holes Configuration Effect on Gas Turbine Rotor Blade. International Journal of Scientific and Research Publication, Volume 5, Issue 8, ISSN 2250-3153
 33.Aung Myat Thu, Ei Ei Htwe, Htay Htay Win (2014). Mathematical Modeling of a Ship Motion in Waves under Coupled Motions. International Journal of Engineering and Applied Sciences, Volume 1, Issue 1, ISSN 2394-3661
 34.Thin Zar Thein Hlaing, Htay Htay Win (2014). Failure Analysis of Thin-walled CNG cylindrical Pressure Vessel. International Journal of Scientific, Engineering and Technology Research, Volume 3, Issue 9, pp 1874-1879.
 35.Aung Ko Latt, Zin Ei Ei Win, Htay Htay Win (2015). Modeling, Analysis and Optimization of a Four Cylinder Engine Crankshaft. International Journal of Advances in Mechanical and Civil Engineering, Volume  2 ,Issue 3.pp 88-93.
 36.Saw Yu Mon, Nyein Aye San, Htay Htay Win (2015). Performance Analysis of Formaldehyde addition in CNG (HCCI) Engine. International Journal of Innovative  Research in Science Engineering and Technology, Volume 4, Issue 8, pp 1111-1120.
 37.Hlae Yi Myo, Htay Htay Win (2014). Design and Stress Analysis of Differential Gear Box at Different Loads and Torques. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 8.
 38.Win lai Htwe, Dr. Htay Htay Win (2014). Design and Stress Distribution of First Stage Gas Turbine Rotor Blade. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 10, ISSN 2319-8885.
 39.Aung Ko Latt, Zin Ei Ei Win, Htay Htay Win (2016). Thermodynamics and Dynamics Analysis of Four-Cylinder Crankshaft. International Journal of Scientific Engineering and Technology Research, Volume 5, Issue 5, pp 0937-0943.
 40.Zar Ni Tin Win, Htay Htay Win, Myint Thein (2016). Performance Test and Structural Analysis of Cross-Flow Turbine. American Scientific Research Journal for Engineering, Technology, and Science, Vol 26, Issue 4, pp 285-303.
 41.May Mya Darli Cho, Htay Htay Win, Aung Ko Latt (2017). Vibrational Analysis of Passive Suspension System for Solar Vehicle. International Journal of Scientific and Research Publications, Vol 7, Issue 12, pp 777-799.
 42.Hlwan Htet Htet San, Htay Htay Win, Myint Thein (2017). Investigation of Stress Analysis of Power Train Units for Light-Weight Car. International Journal of Scientific and Research Publications, Vol 7, Issue 12, pp 800-820.
 43.Thin Zar Thein Hlaing, Htay Htay Win, Myint Thein (2017). Design and Analysis of Steering Gear and Intermediate Shaft for Mannuall Rack and Pinion Steering System. International Journal of Scientific and Research Publications, Vol 7, Issue 12, pp 861-882.
 44.Ni Ni Hlaing, Htay Htay Win, Zaw Moe Htet (2014). Design and Significant Effect of a Centrifugal Pump by Using Variuos Blade Exit Angles. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 14, pp 3018-3024.
 45.Wai Phyo Aung, Htay Htay Win (2014). Design and Analysis of Piston for Two Stages Reciprocating Air Compressor. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 15, pp 3252-3258.
 46.Yu War Myint, Htay Htay Win (2014). Design and Flow Simulation of Runner Blade for Propeller Turbine. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 11, pp 2559-2562.
 47.Aung Kyaw Min, Htay Htay Win, Nyein Aye San (2014). Design of 225 kW Pelton Turbine. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 24, pp 4836-4842.
 48.San San Maw, Htay Htay Win (2014). Numerical Simulation of Fluid Dynamic Behavior in a Fuel Injector. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 12, pp 2779-2782.
 49.May Thingyin, Hla Min Tun, Htay Htay Win (2014). Design and Structural Analysis of Single Plate Clutch. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 10, pp 2238-2241.
 50.Swe Lai’ Min, Htay Htay Win, Myint Thein (2014). Design and Vibration Characteristic Analysis of 10kW Kaplan Turbine Runner Blade Profile. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 6, pp 1038-1044.
 51.Win Pa Pa Aye, Zaw Moe Htet, Htay Htay Win (2014). Design and Velocity Distribution of Runner Blade for Axial Flow Turbine. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 10, pp 2205-2210.
 52.Win Lai Htwe, Htay Htay Win, Nyein Aye San (2015). Design and Thermal Analysis of Gas Turbine Blade. International Journal of Scientific Engineering and Technology Research, Vol 3, Issue 7, pp 62-66.
 53.Aung Myat Thu, Ei Ei Htwe, Htay Htay Win (2015). Numerical Investigation of Ship’s Uncoupled Roll, Heave and Pitch Motion in Irregular Sea. International  Journal of Mechanical and Production Engineering, Vol 3, Issue 7, pp 44-48.
 54.Saw Yu Mon, Nyein Aye San, Htay Htay Win (2015). Numerical Analysis of Combustion Process in CNG (HCCI) Engine. International  Journal of Mechanical and Production Engineering, Vol 3, Issue 7, pp 56-61.
 55.Khin Mar Sein, Htay Htay Win, Nyein Aye San (2018). Effect of Fuel Octane Number on the Performance of Single Cylinder Fou Stroke SI Engine. International Journal For Innovative Research in Multidisciplinary Field, Vol 4, Issue 7, pp 95-99.
 56.Ni Ni Hlaing, Htay Htay Win, Myint Thein (2019). Structural Analysis of Compressor Blades for Turbocharger by Using the Different Materials. International journal of Advances in Scientific Research and Engineering, Volume 5, Issue 12.
 57.Nang Yi Phoo Thet, Myint Thein, Htay Htay Win, Aung Ko Latt (2019). Forward Kinematics and Performance Test of a Six Degree of Freedom  Articulated Robotic Arm. International journal of Advances in Scientific Research and Engineering, Volume 5, Issue 12
 58.May Zon Than Oo, Htay Htay Win, Aung Ko Latt(2019).Theoretically and Numerical Resonance Modal Analysis of Car’s Tyre using ANSYS International journal of Advances in Scientific Research and Engineering, Volume 5, Issue 11
 59.Htay Htay Win, Kay Zin Oo (2019). Modal and Structural Analysis of the Runner Blade for Cross-Flow Turbine in Micro Hydo-power Plant. International Journal for Innovative Research in Multidisciplinary Field, Vol 5, Issue 3, pp 106-114.
 PROCEEDINGS
 1.Htay Htay Win (2008). Design of a  Screw Type Press for Small Scale Jatropha Oil Production. The 8th ASEAN  Science and Technology Week .
 2.Htay Htay Win (2009). Effect of Screw Shaft Speed, Moisture Content and Variety on Oil Recovery from Jatropha Seed. The First International Conference on Science and Engineering, Vol 2, pp 49-53.
 3.Htay Htay Win, Than Than Htike (2013). Design and Performance Anzlysis of Flow Through A Double-Acting Impeller with Backward Curved Blades Using Cfd. The 1st International Conference on Energy, Environment and Human Engeering, MD-2-5.
4. Htay Htay Win, Khaing Zar Lwin (2019). Structural Analysis of Potable Rotary Weeder Blade. The Second International Conference on Science, Technology and Innovation, Mandalay, pp 35.
5. Dr. Htay Htay Win, May Zon Than Oo (2020). Theoretical and Numerical Modal Analysis of Six Spokes wheel’s rim using ANSYS. National Conference on Engineering Research in Commemoration of Annual General Meeting of Federation of Myanmar Engineering Societies. pp 128-133.
6. Shwe Myint Maung, Tin San, Htay Htay Win (2010). Design of Jig and Fixture and Stress Analysis of Base with COSMOS Works. The Second International Conference on Science and Engineering, Vol 2, pp 87-91.
7. Swe Zin Nyunt, Tin San, Htay Htay Win (2010). Design of Tool Storage Magazine for Four Axis Turning and Milling Machine(GMX 250 Linear). The Second International Conference on Science and Engineering, Vol 2, pp 113-117.
8. Than Than Htay, Dr. Htay Htay Win, Dr. Ei Ei Htwe (2013). Performance of Threshing Unit for DKC 685 Combine Harvester. The Fourth International Conference on Science and Engineering.
9. Kay Thi Myaing, Htay Htay Win, Ei Ei Htwe (2013). Design and Flow Analysis of Centrifugal Blower. The Fourth International Conference on Science and Engineering.
10. Kyu Kyu Win, Htay Htay Win, Ei Ei Htwe (2013). Design and Performance Pedition of Centrifugal Pump. The Fourth International Conference on Science and Engineering.
11. May Zin Htwe, Htay Htay Win, Ei Ei Htwe (2013). Design and Experimental Test of Rice Husk Furnace Paddy Dryer. The Fourth International Conference on Science and Engineering.
12. Myo Min Thant, Htay Htay Win, Ei Ei Htwe (2013). Design and Performance Analysis of Harvesting and Threshing Unit for Combine Harvester(40kW).The Fourth International Conference on Science and Engineering.
 13.Swe Zin Aye, Ei Ei Htwe, Htay Htay Win (2013). Design and Feasibility of Francis Turbine Based on Empirical Correlations. The Fourth International Conference on Science and Engineering.
 14.Aung Zaw Tun, Thein Min Htike, Htay Htay Win (2013). Preliminary Kinematic Planning of Groungnut Harvester. The Fourth International Conference on Science and Engineering.
 15.Zar Chi Thaung, Ei Ei Htwe, Htay Htay Win (2013). Design of 64kW Pelton Wheel Turbine for Zinn-Kyite Hydro-Power Plant by Using Empirical Relation. The Fourth International Conference on Science and Engineering.
 16.Su Su Mar, Htay Htay Win (2013). Design of a Darricus Type Vertical Axis Wind Turbine for Electricity Generation. The Fourth International Conference on Science and Engineering.
 17.Swe Lai’ Min, Htay Htay Win, Myint Thein (2013). Design and Vibration Characteristic Analysis of 10kW Kaplan Turbine Runner Blade Profile. The Fourth International Conference on Science and Engineering.
 18.Win Lai Htwe, Htay Htay Win, Ei Ei Htwe (2014). Design and Structural Analysis of First Stage Gas Turbine Rotor Blade. The Fifth International Conference on Science and Engineering.
 19.Aung Ko Latt, Nyein Aye San, Htay Htay Win (2014). Design and Strength Analysis of Crankshaft for 3C Desel Engine. The Fifth International Conference on Science and Engineering.
 20.Aung Myat Thu, Ei Ei Htwe, Htay Htay Win (2014). Numerical Simulation of Naval Ship’s Roll Motion in Wave. The Fifth International Conference on Science and Engineering.
 21.Zar Ni Tin Win, Htay Htay Win (2015). Design and Structural Analysis of Cross-Flow Turbine Runner Blades. The Sixth International Conference on Science and Engineering.
 22.May Mya Darli Cho, Htay Htay Win, Zin Ei Ei Win (2016). Investigation of Chassis Frame for Solar Vehicle. The Seventh International Conference on Science and Engineering.
 23.Hlwan Htet Htet San, Htay Htay Win, Myint Thein (2016). Design and Structural Analysis of Helical Gear for Light-Weight Car. The Seventh International Conference on Science and Engineering.
 24.Thin Zar Thein Hlaing, Htay Htay Win (2016). Design and Stress Analysis of Rack and Pinion Steering System for Solar Car. The Seventh International Conference on Science and Engineering.
 25.Nang Yi Phyu Thet, Myint thein, Htay Htay Win (2017). Structural Analysis of Six Degree of Freedom Articulated Robotic Arm. The Ninth International Conference on Science and Engineering.
 26.Ni Ni Hlaing, Htay Htay Win, Myint Thein (2017). Structural Analysis of Compressor Impeller of Turbocharger by Varying the Number of Blades. The Ninth International Conference on Science and Engineering.
 27.May Zon Than Oo, Htay Htay Win, Aung Ko Latt (2017). Structural Analysis of Aluminium Alloy Car’s Wheel Rim under Different Number of Spokes at Various Speeds. The Ninth International Conference on Science and Engineering.
 28.Nang Yi Phoo Thet, Myint thein, Htay Htay Win (2018). Kinematics and Workspace Analysis of a Six Degree of Freedom Articulated Robotic Arm Using Robotic Toolbox in Matlab. Joint Internal Conference on Science, Technology and Innovation, Mandalay.
 29.Ni Ni Hlaing, Htay Htay Win, Myint Thein (2018). Structural Analysis of Compressor Impeller for Turbocharger. Joint Internal Conference on Science, Technology and Innovation, Mandalay.
 30.May Zon Than Oo, Htay Htay Win, Aung Ko Latt (2018). Structural Analysis of Car’s Wheel Rim under Different Materials and Speeds. Joint Internal Conference on Science, Technology and Innovation, Mandalay.
 31.Khin Mar Sein, Htay Htay Win, Nyein Aye San (2017). Theoretical and Experimental Analysis of Single Cylinder Four Stroke Spark Ignition Engine. The Eighth International Conference on Science and Engineering.
 32.Win Lai Htwe, Htay Htay Win, Nyein Aye San (2015). Design and Thermal  Analysis  of  Gas Turbine Blade. ISERD International  Conference on Engineering Technology and Management
 33.Than Than Htay, Htay Htay Win, Zin Ei Ei Win (2015). Dynamic Stiffness of Shaft for Thresher in Combine Harvester. International Conference on Mechanical, Aeronautics and Production Engineering.
 34.Aung Ko Latt, Zin Ei Ei Win, Htay Htay Win (2015). Modeling, Analysis and Optimization of a Four Cylinder Engine Crankshaft. International Conference on Mechanical, Aeronautics and Production Engineering.
 35.Aung Myat Thu, Ei Ei Htwe, Htay Htay Win (2015). Numerical Investigation of Ship’s Uncoupled Roll, Heave and Pitch Motion in Irregular Sea. ISERD International  Conference on Engineering Technology and Management.
 36.Zar Ni Tin Win, Htay Htay Win, Myint Thein (2016). Design, Construction and Performance Test of Cross-Flow Turbine. IASTEM, International Confrence on Mechanical and Aerospace Engineering.
 37.Hlwan Htet Htet San, Htay Htay Win, Myint Thein (2017). Design and Contact Stress Analysis of Helical Gear for Light Weight Car. IIER International Conference on Science, Innovation and Management, pp 96-101.
 38.Thin Zar Thein Hlaing, Htay Htay Win, Myint Thein (2017). Analysis of Solar Car Steering Tie Rod Using Numerical and Theoretical Approach with Different Materials. IIER International Conference on Science, Innovation and Management, pp 119-124.
 39.May Mya Darli Cho, Htay Htay Win, Aung Ko Latt (2017). Design and Analysis of Leaf Spring for Solar Vehicle. IIER International Conference on Science, Innovation and Management, pp 102-107.
 40.Aye Aye Myo, Htay Htay Win, Nyein Aye San (2013). Design of Double-Suction Centrifugal Pump for Irrigation. The Sixth National Conference on Science and Engineering (Upper Myanmar), pp 677-682.
 41.Phyo Maung Maung Kyaw, Htay Htay Win, Thein Min Htike (2013). Design of 10kW Propeller Turbine for Hydropower Plants. The Sixth National Conference on Science and Engineering (Upper Myanmar), pp 706-710.
 42.Yin New Khaing, Nyein Aye San, Htay Htay Win (2013). Stress Analysis and Cross-sectional Model of Working Table for 3-axis CNC Milling Machine. The Sixth National Conference on Science and Engineering (Upper Myanmar), pp 743-746.
 43.A B Myint, Dr. Htay Htay Win, Dr. Win Pa Pa Myo (2011). Design of Roller Type Linear Guide-way. The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1793-1797
 44.Ma Chaw Su Swe, Dr. Ei Ei Htwe, Dr. Htay Htay Win (2011). Design of Follower Steady Rest Used in Turning Machine. The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1808-1812.
 45.Maung Kyaw Soe Khaing, Dr. Win Pa Pa Myo, Dr. Htay Htay Win (2011). Design of Hydraulic Device for Steady Rest used in CTX 620 Machine. The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1823-1827.
 46.Maung Kyaw Win Tun, Dr. Htay Htay Win, Dr. Ei Ei Htwe (2011). Machining Processes of Warm for Speed Reducer of DMC 105V Linear Machine. The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1828-1832.
 47.Nang Saing Nuet, Dr.Htay Htay Win, Dr. Myat Myat Soe (2011). Design of Speed Reducer for Spiral-Type Swarf Conveyor in DMC 105V Linear Machine. The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1848-1852.
 48.Thida Aung, Dr. Tin San, Dr. Htay Htay Win (2011). Manufacturing Procedure for Saddle Production. The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1872-1876.
 49.Ma War War Hlaing, Dr. Myat Myat Soe, Dr. Htay Htay Win (2011). Design of Linear Guideway for X-axis (DMF 500). The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1877-1881.
 50.Win Kyaw Thu, Win Pa Pa Myo, Htay Htay Win (2011). Design Calculation of Ballscrew for CNC Vertical Milling Machine (Anilam 3000M).  The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1882-1886.
 51.Maung Zaw Htwe, Dr. Htay Htay Win, Dr. Win Pa Pa Myo (2011). Force Analysis of Gooseneck Punch used in Press Brake Machine. The Fourth National Conference on Science and Engineering (Upper Myanmar), Vol 3, pp 1892-1897.
 52.Aung Kyaw Min, Htay Htay Win, Nyein Aye San (2014). Design of 225kW Double Jet  Pelton Turbine. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1424-1430.
 53.Hlae Yi Myo, Htay Htay Win, Hla Min Tun (2014). Design Calculation of Five Speed Transmission Gear Box(Light Truck) and Failure Analysis of Spur Gear Using Finite Element Analysis). The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1470-1475.
 54.Khin Soe New, Dr. Htay Htay Win, Dr. Ei Ei Htwe (2014). Design and Stress Analysis of Threshing Cylinder for a Combine Paddy Harvester (25 HP). The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1520-1525.
 55.May Thingyin , Hla Min Tun, Htay Htay Win (2014). Design and Stress Analysis of Single-Plate Clutch for Light Truck. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1535-1539.
 56.Ni Ni Hlaing, Htay Htay Win, Zaw Moe Htet (2014). Design and Flow Analysis through the Impeller of a Single-Suction Centrifugal Pump. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1574-1578.
 57.San San Maw, U Hla Min Tun, Dr. Htay Htay Win (2014). Design and Flow Analysis of Direct Injection Fuel Injector. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1601-1605.
 58.Thin Zar Thein Hlaing, Dr. Htay Htay Win, U Chit Oo Maung (2014). Failure Analysis of a Thin-walled Cylindrical Pressure Vessel with Hemispherical Head and Ellipsoidal Bottom. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1626-1632.
 59.Tin Nilar Myint, Charm Myae Zaw, Htay Htay Win (2014). Design of Scroll Type Compressor for Air Conditioning System. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1656-1661.
 60.Wai Phyo Aung, Dr. Htay Htay Win, Dr. Thein Min Htike (2014). Design and Analysis of Piston and Piston pin for Two Stages Reciprocating Air Compressor. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1667-1673.
 61.Win Pa Pa Aye, Zaw Moe Htet, Htay Htay Win (2014). Design and Flow Simulation of Runner Blade for kaplan Turbine. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1674-1679.
 62.Yu War Myint, Htay Htay Win, Paing Htet Kyaw Kyaw (2014). Design of Propeller Turbine for Micro-Hydro Power Plants. The Seventh National Conference on Science and Engineering(Upper Myanmar), Vol 2, pp 1685-1691.
 63.Hla Myint Aung, Dr. Htay Htay Win, Dr. Ei Ei Htwe (2010). Design of Combustion Chamber of Gas Turbine. The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 177-181.
 64.Htet Htet Linn, Dr. Aung Myo Lin, Daw Htay Htay Win (2010). Design and Construction of Speed Increasing Gearbox for Poncelet Water Wheel(6kW). The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 182-186.
 65.Ma Kay Thi Myaing, Dr. Htay Htay Win, Dr. Tin San (2010). Design of Piston and Connecting Rod for Four Wheel Drive Double Cab Engine. The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 187-191.
 66.Ma Khin Ohn Mar Myo, Dr. Ei Ei Htwe, Dr. Htay Htay Win (2010). Design of Automobile Air-Conditioning System for Four Wheel Drives. The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 192-196.
 67.Ma Mon Mon Aye, Dr. Htay Htay Win, Dr. Myat Myat Soe (2010). Various Type of Analysis of Solar Collector. The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 197-201.
 68.Than Than Htay, Dr. Htay Htay Win, Dr. Win Pa Pa Myo (2010). Design of Centrifugal Air Compressor for Water Pumping System. The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 222-226.
 69.Ma Theint Theint San, Dr.Myat Myat Soe, Dr. Htay Htay Win (2010). Design of Axial Flow Pump. The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 227-231.
 70.Thet Htar Aung, Dr. Aung Myo Linn, Daw Htay Htay Win (2010). Design and Construction of Rotor for Poncelet Water Wheel (6kW). The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 232-236.
 71.Maung Aung Myo Aye, Dr.Tin San, Dr. Htay Htay Win (2010). Pattern Design of Engine Head for Four Wheel Drive Double Cab Engine. The Third National Conference on Science and Engineering (Northern Myanmar), Vol 2, pp 388-392.
 72.Zaw Zaw Lwin (U), Dr. Htay Htay Win (2009). Design and Calculation of Five Speed Manual Gear-Box(Landcruiser). The Second National Conference on Science and Engineering (Upper Myanmar), Vol 2, pp 1067-1071.
 73.San Yin Htwe (Daw), Dr. Htay Htay Win (2009). Design Calculation of Coil Spring in the Independent Suspension System (Landcruiser). The Second National Conference on Science and Engineering (Upper Myanmar), Vol 2, pp 1080-1084.
 74.Maung Kyaw Kyaw Naing, Daw Htay Htay Win (2009). Design Calculation of Central Air Conditioning System for Convocation Hall of Technological University (Magway). The Second National Conference on Science and Engineering (Upper Myanmar), Vol 2, pp 1108-1112.
 75.Kay Zin Oo, Htay Htay Win, Ei Ei New (2018). Design and Modal Analysis of 50kW Cross-Flow Turbine Runner Blades for Micro Hydro Power Plant. The Eleventh National Conference on Science and Engineering(Upper Myanmar), pp 179.
 76.Lae Lae Naing, Myint Thein, Htay Htay Win (2018). Design and Static Analysis of the Centrifugal Blower Impeller for Rice Mill. The Eleventh National Conference on Science and Engineering(Upper Myanmar), pp 181.
 77.Phyu Phyu Thwe, Saw Yu Mon, Htay Htay Win (2018). Stress Analysis on the Blade of Centrifugal Blower Impeller for Flour Mill. The Eleventh National Conference on Science and Engineering(Upper Myanmar), pp 189.
 78.Shi Mon, Aung Ko Latt, Htay Htay Win (2018). Structural Analysis of Locomotive Brake Block. The Eleventh National Conference on Science and Engineering(Upper Myanmar), pp 192.
 79.Than Zaw Oo, Htay Htay Win, Ei Ei Khaing (2018). Design and Analysis of Coil Spring for Automobile. The Eleventh National Conference on Science and Engineering(Upper Myanmar), pp 195.
 80.Tin Nilar Win, Htay Htay Win, Aung Ko Latt (2018). Design and Stress Analysis of Turbine Blade of Turbocharger. The Eleventh National Conference on Science and Engineering(Upper Myanmar), pp 203.  
 81.Zaw Htet Win, Dr.Htay Htay Win, U Paing Htet Kyaw Kyaw (2015). Heat Transfer Analysis of the First Stage Gas Turbine Rotor Blade with Convection Cooling Holes. The Eight National Conference on Science and Engineering(Upper Myanmar), pp 694-700.
 82.Po Po Thin, Myint Thein, Htay Htay Win (2016). Analysis of Horizontal Axis Wind Turbine Shaft Design Under Fatigue Loading. The Ninth National Conference on Science and Engineering(Upper Myanmar).
 83.Nang Yi Phoo Thet, Htay Htay Win, Zin Ei Ei Win (2016). Stress Analysis of Horizontal Cylindrical Pressure Vessel with Elliptical Head. The Ninth National Conference on Science and Engineering(Upper Myanmar).
 84.Pont Pont Ei, Zin Ei Ei Win, Htay Htay Win (2016). Stress Analysis of the Compressor Impeller of Turbocharger. The Ninth National Conference on Science and Engineering(Upper Myanmar).
 85.Yin Yin Aye, Myint Thein, Htay Htay Win (2017). Design and Coupled Analysis of Disc Brake for Hydraulic Braking System of Ultra-Light Solar Car. The Tenth National Conference on Science and Engineering(Upper Myanmar).
 86.Wint Wint Khaing, Htay Htay Win, Aung Ko Latt (2017). Design Optimization and Static Analysis of Leaf Springs for Solar Car Suspension System. The Tenth National Conference on Science and Engineering(Upper Myanmar).
 87.Thin Thin Wai, Tin San, Htay Htay Win (2017). Design of Power System for Ultra-Light Solar Car. The Tenth National Conference on Science and Engineering(Upper Myanmar).
 88.Moh Moh Myint Thu, Myint Thein, Htay Htay Win (2017). Design and Bending Stress Analysis of Helical and Bevel Gears in Differential Gear Box for Solar Car. The Tenth National Conference on Science and Engineering(Upper Myanmar).
 89.Nang Hsu Thandar Ko, Htay Htay Win, Aung ko Latt (2017). Design and Analysis of Chassis Frame for Solar Car. The Tenth National Conference on Science and Engineering(Upper Myanmar).
 90.Cho Cho Myint, Htay Htay Win, Aung Ko Latt (2017). Fatigue Analysis of Rear Axle Shaft for Ultra Light Car by Using Modified Goodman Method. The Tenth National Conference on Science and Engineering(Upper Myanmar).
 91.Khaing Zar Lwin, Htay Htay Win, Myint Thein (2019). Design and Structural Analysis of Single Row Power Opeated Rotary Weeder Blade. The Twelfth National Conference on Science and Engineering (Upper Myanmar)
 92.Thandar Htwe, Htay Htay Win, Aung Ko Latt (2019). Design and Structural Analysis of Threshing Drum for Paddy Thresher. The Twelfth National Conference on Science and Engineering (Upper Myanmar).
 93.Aye Moh Moh Aung, Myint Thein, Htay Htay Win (2019). Design and Bending Stress Analysis of Worm and Worm Gear Used in Power Transmission System for Power Weeder. The Twelfth National Conference on Science and Engineering (Upper Myanmar).
 94.Theint Theint Ei, Aung Ko Latt, Htay Htay Win (2019). Structural Analysis of Shafts and Bearings for Paddy Thresher. The Twelfth National Conference on Science and Engineering (Upper Myanmar).
 95.Chit Ko Ko, Htay Htay Win, Myint Thein (2019). Structural Analysis of Drive Mechanism for Oat Flake Machine. 10th International Conference on Science and Engineering, Volume 2, pp 261-268.